Showing 46–54 of 54 results
FlangeStub End Flange
Read moreSK Fitting Valve offers flanges for fittings. Liver ligament, both flat surface and raised surface We have a wide range of stubs and flanges for you to choose. Whether it’s material grade or size such as 3/8″”~80″” and DN10~DN2000, Fu Thai Pipe is here to recommend on choosing the flange that will meet your purpose.
- Flange
SW – Socket Weld Flange
Read moreSW – Socket Weld Flangeล is a flange with the bore as a socket to connect to the pipe. It’s connected to the outside on the shoulder that doesn’t require welding. The external welds are fillet welds, so the integrity of the welds cannot be checked by radiographic methods. This type of flange is used for high-pressure pipes that are smaller than the flange itself. This type of flange has internal weld holes to allow liquid or gas to flow through the pressure pipe. SK Fitting Valve has welded flanges manufactured in a variety of material grades and sizes that meet the purpose of use.
- Thread Fitting
Thread Fitting
Read moreThread Fitting are often used to connect water pipes such as smaller diameter water pipes, compressed air pipes, and low-pressure steam pipes with threaded ends. The screw threads of the steel joints can be coated with glue to make sure a tight enough welding.
- Thread Fitting
Threaded couplings
Read moreThreaded couplings are often used to connect water pipes such as smaller diameter water pipes, compressed air pipes, and low-pressure steam pipes with threaded ends. The screw threads of the steel joints can be coated with glue to make sure a tight enough welding.
- Flange
Threaded Flange
Read moreThreaded Flange with a threaded bore is called a threaded flange. It’s designed for low-pressure and low-temperature pipes. Without welding, assembly and installation are simple. This allows it to be installed in regions where fuel is available. Air and water utilities use threaded flanges.
- Flange
Threaded Flange
Read moreThreaded Flange with a threaded bore is called a threaded flange. It’s designed for low-pressure and low-temperature pipes. Without welding, assembly and installation are simple. This allows it to be installed in regions where fuel is available. Air and water utilities use threaded flanges.
- Valve
Valve
Read moreSK Fitting Valve supplies valves for general use, high-rise buildings, and industrial facilities. We distribute leading international brands such as Kitz, Yoshitake, Tozen, and Yamamoto, along with domestically produced cast-iron valves under the TOMO brand and high-quality stainless steel valves from Taiwan.
- Flange
Weld Neck Flange
Read moreWeld Neck Flange is a flange that transfers pressure or stress to the flange, which goes to the tube through the strong neck area. There is no need to worry about cracks in the weld joints. It can occur with weld and slip-on flanges. This special design makes this type of flange expensive and is often used in applications where high pressure is an important factor.
