Showing 37–45 of 54 results
ValvePressure Reducing Valve
Read morePressure Reducing Valve
Pressure Reducing Valve is a valve used to reduce the output pressure in both conditions: flowing and no water flow.- Flexible & Expansion Joint
Rubber Flexible Joint
Read moreFlexible hose or hose for connecting of SK Fittings Valves are flexible and strong. It is resistant to the movement of the pipe as well.
- Valve
Safety Valve
Read moreSafety Valve also known as “Safety valve” or “Safety”, is a safety device of the system. Its main function is to release the pressure inside the system. The valve will automatically operate when the pressure exceeds the set value. This type of valve is used for compressible fluids such as steam or gases that require rapid pressure relief.
- Flange
SO – Slip On Flange
Read moreSlip-on flanges with an inner diameter larger than the outer diameter of the tube body. This type of flange is connected to the pipe body by using fillet welds at the top and bottom of the flange body. A slip-on flange is like a socket welded flange, with the difference being that the inner hole of the slip-on flange has no shoulder. Therefore, this type of flange connection must be welded both on the outside and on the inside. But we only weld flanges.
- Valve
Solenoid Valve
Read moreSolenoid Valve is a valve used to control the direction of air (or fluid) by energizing an electrical coil, together with a spring return or a second coil when the valve must move to/hold another position. When current flows through the coil, the magnetic field pulls the plunger/armature to shift the valve; when power is removed, a spring (typical for single-solenoid designs) returns the valve to its normal position.
- Thread Fitting
Stainless Steel Thread Fitting
Read moreThreaded couplings are often used to connect water pipes such as smaller diameter water pipes, compressed air pipes, and low-pressure steam pipes with threaded ends. The screw threads of the steel joints can be coated with glue to make sure a tight enough welding.
- Thread Fitting
Stainless steel threaded fittings
Read moreThreaded couplings are often used to connect water pipes such as smaller diameter water pipes, compressed air pipes, and low-pressure steam pipes with threaded ends. The screw threads of the steel joints can be coated with glue to make sure a tight enough welding.
- Valve
Steam Trap
Read moreSTEAM TRAP Although steam trap is a small device, and the price is not high, it is very necessary and must be selected accordingly. Otherwise, it may cause enormous damage and loss to the factory without the management’s knowledge. The main function of the steam trap is to drain the condensate and the air or gas-generated or contained in the steam system to be discharged without the loss of steam from the system.
