Steam Trap
Steam Trap
STEAM TRAP Although steam trap is a small device, and the price is not high, it is very necessary and must be selected accordingly. Otherwise, it may cause enormous damage and loss to the factory without the management’s knowledge. The main function of the steam trap is to drain the condensate and the air or gas-generated or contained in the steam system to be discharged without the loss of steam from the system.
A steam trap can be divided into 3 main types according to the principle of operation:
1. THERMODYNAMIC STEAM TRAP
2. THERMOSTATIC STEAM TRAP
3. MECHANIC STEAM TRAP
Related products
ValveValve
Read moreSK Fitting Valve supplies valves for general use, high-rise buildings, and industrial facilities. We distribute leading international brands such as Kitz, Yoshitake, Tozen, and Yamamoto, along with domestically produced cast-iron valves under the TOMO brand and high-quality stainless steel valves from Taiwan.
- Valve
Gate Valve
Read moreGate Valve imported from Japan, good properties, resistant to high friction. Suitable for on-off work, water blocking.
- Valve
Foot Valve
Read moreFoot valve Thai people often call the skull valve. It is the bottom valve used to suck water from below the pump. By supplying water to the pump, there must be a casting or mule. When the water goes into the pump, it also flows into the pipe. This valve prevents water from flowing into the well. The water in the pipe and at the pump will draw up the water in the well when the pump is powered on. One side of this type of valve has a thread.
- Valve
Solenoid Valve
Read moreSolenoid Valve is a valve used to control the direction of air (or fluid) by energizing an electrical coil, together with a spring return or a second coil when the valve must move to/hold another position. When current flows through the coil, the magnetic field pulls the plunger/armature to shift the valve; when power is removed, a spring (typical for single-solenoid designs) returns the valve to its normal position.
